PEAK METAL WORKING OIL

-

Raza DD

RAZA DD is a general purpose EP water-soluble cutting oil with excellent resistance to bacteria and corrosion. It is suitable for a wide range of machining operations with most metals when mixed at the correct ratio with water. RAZA DD forms a stable milky white emulsion and will provide excellent cooling, lubricating and corrosion protection.

-

DRAWING OIL WW

DRAWING OIL WW is an extremely viscous extreme pressure concentrate based on a paraffinic type hydrocarbon for use when drawing metals, particularly stainless steel; also for brushing on metal parts during machining operations.
DRAWING OIL WW is formulated to be water washable for easy “clean up”. Water spray or water bath will emulsify DRAWING OIL WW allowing for easy separation. The emulsifier will provide an unstable emulsion to allow quick break of the oil from the water in an oil separator system.

-

DRAWING OIL WW- H

DRAWING OIL WW-H is an extremely viscous extreme pressure concentrate based on a paraffinic type hydrocarbon for use when drawing metals, particularly stainless steel; also for brushing on metal parts during machining operations.
DRAWING OIL WW-H is formulated to be water washable for easy “clean up”. Water spray or water bath will emulsify DRAWING OIL WW-H allowing for easy separation. The emulsifier will provide an unstable emulsion to allow quick break of the oil from the water in an oil separator system.

This product is a concentrate and can be diluted with mineral oils such as gear oils or hydraulics for lighter duty operation.

 
-

EC3 Drawing Oil

WD Fluid is a premium quality multipurpose spray containing lubricating, penetrating and water displacing ingredients. After application WD Fluid leaves a protective film that offers short term corrosion protection in wet or dry conditions. WD Fluid is suitable for automotive, industrial, marine and household applications.

-

NEATCUT 32

NEATCUT 32 is a low viscosity, transparent, inactive type cutting oil recommended for high speed machining of free cutting steels and all non-ferrous metals. It is an excellent dual-purpose cutting and lubricating oil for higher speed machining of free cutting steels; brass, aluminium, copper, etc. in multiple spindle automatics.

-

NEATCUT 68

NEATCUT 68 is a heavy, transparent, active, non-emulsifying, high additive EP cutting oil for use on ferrous metals, stainless and nickel/chrome hi-tensile steels.

-

NEAT CUT H

NEATCUT H is a highly refined low viscosity, inactive type transparent cutting oil recommended for repetition work on high speed single head automatic lathes.  NEATCUT H can also serve both as a machine lubricant and as a cutting oil.

-

GUN DRILL OIL NEAT ISO GRADES 15, 22, 68

GUN DRILL OIL NEAT is an extreme pressure mineral non-soluble cutting oil with low odour characteristics for machine operator’s comfort. It contains an extreme pressure additive system, rust and anti-foam additives for long tool life, good heat transfer and surface finish.

Improved surface finish on metals Increased tool life Faster and more efficient machining Excellent swarf flushing properties.