PEAK INDUSTRIAL SPECIALITY

-

WHITE OIL 15

 

 


WHITE OIL 68

.

 


CATTLE BLOAT

 

.


CONCRETE MOULD OIL

 

CONCRETE MOULD OIL is a fortified fluid with excellent surface conditioning characteristics to enable quick release of the mould and impart an excellent surface finish. It is suitable for all types of moulds and formwork where concrete, plaster or clay brick, tile or paver products are being manufactured. Concrete Mould Oil is suitable to be applied by spray, brush or swab, ensuring that a thin but even film of oil on mould surfaces is achieved.



LOG END SEALER

LOG END SEALER is designed to prevent end checking / cracking of sawn or cut timber. It comprises of a wax and water emulsion, and is off-white in colour. Log End Sealer has an expected shelf life of 12 months.

 


ROCK DRILL 100

 

ROCK DRILL 100 is specially formulated for the lubrication of percussion type air tools, including rock drills, paving breakers, pneumatic pile drivers, ballast tampers, chipping hammers, etc. Application is most commonly via an oil mist carried in the air supplied to the tool, which may be supplied either from an integral reservoir in the tool, an air line lubricator, or in the case of larger machines a central reservoir. Rock Drill 150 contains
advanced Extreme Pressure (EP) and tackiness additives and is fully inhibited against rust and oxidation.



ROCK DRILL 150

 

ROCK DRILL 150 is specially formulated for the lubrication of percussion type air tools, including rock drills, paving breakers, pneumatic pile drivers, ballast tampers, chipping hammers, etc. Application is most commonly via an oil mist carried in the air supplied to the tool, which may be supplied either from an integral reservoir in the tool, an air line lubricator, or in the case of larger machines a central reservoir. Rock Drill 150 contains advanced Extreme Pressure (EP) and tackiness additives and is fully inhibited against rust and oxidation.



EVAP WIRE ROPE

Vacuum Pump Oil 55 is manufactured using high quality solvent refined paraffinic base stocks. The blend formulation used was originally designed for use in Robinaire vacuum pumps, which were widely used in the refrigeration industry with vacuum readings of 0.01 mm/Hg. It is also suitable for general service in a wide range of vacuum pumps, particularly those associated with the refrigeration trade and milk industry.
For best performance Vacuum Pump Oil 55 should be used in clean machines only.