Spill Fix Absorbent 20KG

PEAK INSTANT HAND SANITIZER

PEAK Instant Hand Sanitizer is a hand sanitiser that removes 99.9% of germs and bacteria that can be spread and cause illness and infection without dehydrating the skin and leaving a sticky residue.

Jack & Press Oil

Jack and Press Oil is a special hydraulic oil formulated for mechanical hydraulic jacks and presses. It is formulated with additives to control wear, corrosion and foaming. It is compatible with seal materials used in jacks and presses.

Brake Cleaner

Brake Cleaner is a wide boiling range, rapidly evaporating solvent ideal in brake cleaning. It is also used as a cleaning solvent in many applications and industries as it leaves no residue after use and evaporates rapidly.

Degreaser

Rock Drill 100 is specially formulated for the lubrication of percussion type air tools, including rock drills, paving breakers, pneumatic pile drivers, ballast tampers, chipping hammers, etc. Application is most commonly via an oil mist carried in the air supplied to the tool, which may be supplied either from an integral reservoir in the tool, an air line lubricator, or in the case of larger machines a central reservoir. Rock Drill 100 contains advanced Extreme Pressure (EP) and tackiness additives and is fully inhibited against rust and oxid

ation

Handcleaner Blue

Handcleaner Blue is an universal hand cleaner.

Product consists of a balanced blend of highly biodegradable anionic and non-anionic surface active agents and polyethylene
beads specifically designed for mild abrasive action.

Parts Wash

Parts Wash fluid is a petroleum based solvent suitable for use in re-circulating and bath  type parts washing machines. It has a high flash point, approximately 75 Celsius, and a low evaporation rate. Parts Wash is specially designed to penetrate and dissolve built-up grime and grease. Suitable for use as a general cleaning solvent for automotive, industrial and agricultural applications.

Truck Wash

Truck Wash is a high quality, heavy duty, and hard surface cleaner safe on all paint, plastic and metal surfaces. It has excellent grime penetration and is free rinsing. It is designed for use on any type of vehicle including trucks and trailers, cars, 4-wheel drive vehicles, vans, motorcycles, boats, and caravans. Truck Wash is suitable for manual and automatic washing.

For manual washing Truck Wash can be diluted 1 to 20-50 parts of water, apply to vehicle and rinse thoroughly. For pressure/automatic system, Truck Wash can be metered into pressure system and/or applied to surface of vehicle and then rinsed off. As a hand or brush wipe-on application, use a ratio of 1 cap truck wash

                              to10 litres of water.A handy time saving tip – To a clean and dry surface, apply a 1 to 10 parts solution of truck wash to the surface of interest, use vehicle and after

                              completion of tour of duty, hose off. Reapply next morning when dry allow drying and repeating process to ensure an easy to clean surface.