PEAK TRANSGEAR XP 80

PEAK TRANSGEAR XP80

PKGM7580020
PKGM7580020
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580001 1 Litre 6
PKGM7580020 20 Litre
PKGM7580060 60 Litre
PKGM7580205 205 Litre

DESCRIPTION & APPLICATION

PEAK TRANSGEAR XP 80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK TRANSGEAR XP 80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK TRANSGEAR XP 80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK TRANSGEAR XP 80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK TRANGEAR XP 80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK 75W80

PEAK 75W80

PKGM7580005_HR
PKGM7580005_HR
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580005 5 Litre 4

DESCRIPTION & APPLICATION

PEAK 75W80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK 75W80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK 75W80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK 75W80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK 75W80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK PROCESS OIL 460

PEAK PROCESS OIL 460

Generic 20L
Generic 20L
Product Code Pack Size CTN QTY
PKIPRO460020 20 Litre
PKIPRO460205 205 Litre
PKIPRO4601000 1000 Litre

PRODUCT DESCRIPTION

PEAK PROCESS OIL 460 is a high viscosity hydro-processed paraffinic process oil. It has low sulphur, nitrogen, and aromatic content which delivers good thermal and oxidation stability.

PEAK PROCESS OIL 460 is used in a variety of applications: as an extender in the plastics, rubber and adhesive industry, a carrier in chemical processing, in the manufacture of finished lubricants and in many other applications.

BENEFITS

  • Very Good Oxidation stability
  • Low aromatic and Sulphur content
  • Good viscosity-temperature characteristics
  • Low volatility

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.898
Viscosity 40°C cSt 485
Viscosity 100°C cSt 31.8
Viscosity Index 97
Flash Point °C >230

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK PROCESS OIL 100

PEAK PROCESS OIL 100

Generic 20L
Generic 20L
Product Code Pack Size CTN QTY
PKIPRO100020 20 Litre
PKPRO0100205 205 Litre
PKPRO01001000 1000 Litre

PRODUCT DESCRIPTION

PEAK PROCESS OIL 100 is a medium viscosity hydro-processed paraffinic process oil. It has extremely low sulphur, nitrogen, and aromatic content which delivers excellent thermal and oxidation stability.

PEAK PROCESS OIL 100 is used in a variety of applications: as an extender in the plastics, rubber and adhesive industry, a carrier in chemical processing, in the manufacture of finished lubricants and in many other applications.

BENEFITS

  • Exceptional Oxidation stability
  • Low aromatic and Sulphur content
  • Good viscosity-temperature characteristics
  • Low volatility

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.872
Viscosity 40°C cSt 108
Viscosity 100°C cSt 12.5
Viscosity Index 100
Flash Point °C >230

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK PROCESS OIL 32

PEAK PROCESS OIL 32

PKIPRO032020
PKIPRO032020
Product Code Pack Size CTN QTY
PKIPRO032020 20 Litre
PKIPRO032205 205 Litre
PKIPRO0321000 1000 Litre

PRODUCT DESCRIPTION

PEAK PROCESS OIL 32 is a medium viscosity hydro-processed paraffinic process oil. It has extremely low sulphur, nitrogen, and aromatic content which delivers excellent thermal and oxidation stability.

PEAK PROCESS OIL 32 is used in a variety of applications: as an extender in the plastics, rubber and adhesive industry, a carrier in chemical processing, in the manufacture of finished lubricants and in many other applications.

BENEFITS

  • Exceptional Oxidation stability
  • Low aromatic and Sulphur content
  • Good viscosity-temperature characteristics
  • Low volatility

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK LHM FLUID

PEAK LHM FLUID

PKPML001_HR
PKPML001_REAR_HR
PKPML001_HR PKPML001_REAR_HR
PRODUCT CODE PACK SIZE CTN QTY
PKPML001 1 Litre 12

PRODUCT DESCRIPTION

PEAK LHM FLUID is a high-performance Mineral Hydraulic Fluid engineered for wide coverage and capabilities where used as recommended in brake, hydraulic, or power steering systems of many vehicle and equipment manufacturers. It may be used in Citroen hydraulic systems where the hydraulic reservoir is painted green, and used in brakes suspension and power steering. 

PEAK LHM FLUID utilises Global Technology Additives which have completed exhaustive OEM research and development. This product has an exceptionally high viscosity index, low pour point, and very high boiling point giving it superior performance across extreme temperature variations. It exhibits excellent seal compatibility, is non-corrosive, and does not naturally attract moisture. 

CAUTION: This product must not be mixed with conventional brake fluids like DOT 3, DOT 4, DOT 5, or LHS. It may however be mixed with other fluids meeting LHM or LHM PLUS specifications.

BENEFITS

  • Compatible with LHM or LHM PLUS

  • French, European, and other vehicles were specified

  • Brake Fluid – Construction Equipment

  • Brake Fluid – Tractors and other farm equipment

  • Passenger cars & Light Commercial Vehicles where specified

  • Long service life

  • Exceptional all-climate performance

SPECIFICATIONS AND PERFORMANCE LEVEL

  • PSA Citroen B71 2710

  • Renault B71 2710

  • Rolls Royce / Bentley

  • Jaguar  XJS

  • BMW 

  • ISO  7308

  • Rover

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Boiling Point °C (not mixed)
Flash Point °C (not mixed)
Colour

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPSC.325

PEAK POWER STEERING CLEANER

PKES1040005

PEAK 10W40

PKTMD3005_HR-3

PEAK ATF DX3

PKBFD3001

PEAK BRAKE FLUID DOT 3

PEAK LOMA ZF 32

PEAK LOMA ZF 32

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHMZF032020 20 Litre
PKIHMZF032205 205 Litre

DESCRIPTION & APPLICATION

PEAK LOMA ZF 32 is a high-performance, Zinc-Free, anti-wear hydraulic oil formulated using
highly refined base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam
additives. The result is a thermally stable fluid capable of handling high loads and
temperatures. It is compatible with most pumps, valves and seal materials used in hydraulic
systems.

PEAK LOMA ZF 32 is also suitable for general industrial equipment, machine tools, rotary air
compressors, torque converters and enclosed gearboxes and where extreme pressure oils are
not required. Specifically developed for use with pumps containing silver plated components
due to the use of zinc-free anti wear additives

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and
    provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced
    maintenance
  • Enhanced air release and anti-foam properties that prevent cavitation.
  • Excellent water separation and hydrolytic stability means reduced down time through
    prolonged lubricant life and improved equipment performance.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ISO 6743 / 4 (HM)
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 126
  • AFNOR NF E 48-603 (HM)

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application,
talk with our expert technical staff today.

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

PEAK LOMA HVI 15

PEAK LOMA HVI 15

Generic 20L
Generic 20L
th style="text-align:center;">CTN QTY
PRODUCT CODE PACK SIZE
PKIHH022020 20 Litre
PKIHH022205 205 Litre
PKIHH0221000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA HVI 15 is a high-performance, high viscosity index, anti-wear hydraulic oil
formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors and
anti-foam additives.

PEAK LOMA HVI 15 is a thermally stable fluid and the High Viscosity Index characteristics
provide a stable fluid over wide variations in ambient and operating temperatures. It is
compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 15 meets the requirements of the following pump manufacturers: Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison, Oilgear, Cincinnati Milacron

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating
    temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced
    maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through
    prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 15 is not suitable for use with pumps containing silver plated
components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.850
Viscosity 40°C cSt 20.8
Viscosity 100°C cSt 4.6
Viscosity Index 140
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

PEAK LOMA 320

PEAK LOMA 320

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHM320020 20 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 320 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 320 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

PEAK LOMA 220

PEAK LOMA 220

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHM220020 20 Litre
PKIHM220205 205 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 220 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 220 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12
TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT