PEAK TRANSGEAR XP 80

PEAK TRANSGEAR XP80

PKGM7580020
PKGM7580020
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580001 1 Litre 6
PKGM7580020 20 Litre
PKGM7580060 60 Litre
PKGM7580205 205 Litre

DESCRIPTION & APPLICATION

PEAK TRANSGEAR XP 80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK TRANSGEAR XP 80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK TRANSGEAR XP 80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK TRANSGEAR XP 80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK TRANGEAR XP 80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK LHM FLUID

PEAK LHM FLUID

PKPML001_HR
PKPML001_REAR_HR
PKPML001_HR PKPML001_REAR_HR
PRODUCT CODE PACK SIZE CTN QTY
PKPML001 1 Litre 12

PRODUCT DESCRIPTION

PEAK LHM FLUID is a high-performance Mineral Hydraulic Fluid engineered for wide coverage and capabilities where used as recommended in brake, hydraulic, or power steering systems of many vehicle and equipment manufacturers. It may be used in Citroen hydraulic systems where the hydraulic reservoir is painted green, and used in brakes suspension and power steering. 

PEAK LHM FLUID utilises Global Technology Additives which have completed exhaustive OEM research and development. This product has an exceptionally high viscosity index, low pour point, and very high boiling point giving it superior performance across extreme temperature variations. It exhibits excellent seal compatibility, is non-corrosive, and does not naturally attract moisture. 

CAUTION: This product must not be mixed with conventional brake fluids like DOT 3, DOT 4, DOT 5, or LHS. It may however be mixed with other fluids meeting LHM or LHM PLUS specifications.

BENEFITS

  • Compatible with LHM or LHM PLUS

  • French, European, and other vehicles were specified

  • Brake Fluid – Construction Equipment

  • Brake Fluid – Tractors and other farm equipment

  • Passenger cars & Light Commercial Vehicles where specified

  • Long service life

  • Exceptional all-climate performance

SPECIFICATIONS AND PERFORMANCE LEVEL

  • PSA Citroen B71 2710

  • Renault B71 2710

  • Rolls Royce / Bentley

  • Jaguar  XJS

  • BMW 

  • ISO  7308

  • Rover

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Boiling Point °C (not mixed)
Flash Point °C (not mixed)
Colour

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPSC.325

PEAK POWER STEERING CLEANER

PKES1040005

PEAK 10W40

PKTMD3005_HR-3

PEAK ATF DX3

PKBFD3001

PEAK BRAKE FLUID DOT 3

PEAK 15W40

PEAK 15W40

PKEM1540001_HR
PKEM1540005_HR
PKEM1540005_REAR_HR
PKEM1540020_HR
PKEM1540001_HR PKEM1540005_HR PKEM1540005_REAR_HR PKEM1540020_HR
Product Code Pack size CTN QTY
PKEM1540001 1 Litre 6
PKEM1540005 5 Litre 4
PKEM1540020 20 Litre
PKEM1540205 205 Litre

PRODUCT DESCRIPTION

PEAK 15W40 is an advanced mineral technology high-performance multi-grade, low viscosity engine oil formulated to provide wide temperature range engine protection that is required by API SN/CF. It is specially formulated to provide extra protection against the harmful effects of stop-and-go driving and high and low-temperature engine operation. 

PEAK 15W40 is recommended for all petrol engines fitted with multi-valve and multi-cam cylinder heads, turbos, superchargers, and where computer-controlled engine management systems are fitted. Also suited for vehicles with or without catalytic converters and is ideal for L.P.G /  C.N.G and Dual fuel engines. The perfect choice for light-duty diesel turbocharged and naturally aspirated engines in passenger cars, light commercials, and SUVs / 4WDs. We recommend this lubricant for all vehicles where a 15W40 SN CF engine oil is specified. NOT suitable for diesel’s fitted with Diesel Particulate Filters (DPF)

PEAK 15W40 is a popular viscosity and is highly recommended for later models vehicles. It is a premium mid viscosity range engine oil that suits a wide variety of vehicles including many new and most mid-year modern petrol vehicles and those fitted with dedicated gas or using dual-fuel including E10 and E85. It suits modern 4, 6, and 8 cylinder engines, including many Australian, Japanese, Asian, US, and European vehicles. Suitable for Light Duty Diesel engines in passenger cars, 

PEAK 15W40 is formulated with a high level of detergency / dispersancy minimising formulation of low-temperature sludge leading to cleaner engines. Advanced Mineral Technology offers total engine protection during the three stages of the drive cycle – start-up, warm-up, and normal operating conditions. It provides excellent thermal and oxidation stability, freedom of ring sticking, and reduction in deposits leading to reduced engine wear and a longer engine and component life.

BENEFITS

  •  Engine seals stay soft and pliable to minimise and reduce oil leakages 

  •  Excellent detergent additives to improve engine cleanliness 

  •  Outstanding thermal and oxidation stability 

  • NOT suitable for diesels fitted with Diesel Particulate Filters (DPF)

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API   SN

  • ACEA A3/B4

  • ACEA A3/B3-12
  • VW 501 01/505 00

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³  0.8
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index 1
Flash Point °C >2
Colour L

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK 4 SEASONS COOLANT CONCENTRATE

PEAK 4 SEASONS COOLANT CONCENTRATE

PKRC4SC001_HR
PKRC4SC001_REAR_HR
PKRC4SC005
PKRC4SC005_REAR_HR
PKRC4SC020_HR
PKRC4SC001_HR PKRC4SC001_REAR_HR PKRC4SC005 PKRC4SC005_REAR_HR PKRC4SC020_HR
Product Code Pack size CTN QTY
PKRC4SC001 1 Litre 12
PKRC4SC02.5 2.5 Litre 6
PKRC4SC005 5 Litre 4
PKRC4SC020 20 Litre
PKRC4SC060 60 Litre
PKRC4SC205 205 Litre

DESCRIPTION & APPLICATION

PEAK 4 SEASONS COOLANT CONCENTRATE is a universal fully formulated coolant concentrate suitable for 4, 6 & 8 cylinder cars and light commercial vehicles.

PEAK 4 SEASONS COOLANT CONCENTRATE gives your engine and cooling system extended multi-functional protection. It contains advanced corrosion inhibitors that will protect your engine and cooling system components. Suitable for aluminum, brass, cast iron, and copper cooling systems.

BENEFITS

  • Silicate, Borate, Phosphate, Amine, and Nitrite free
  • Excellent choice for use in mixed fleets
  • Safe to use with aluminum and cast iron engine components
  • Compatible with all plastics, rubbers, seals, and aluminum

Note: Not to be used in concentrated form

SPECIFICATIONS AND PERFORMANCE LEVEL

  • AS/NZS 2108.1Coolant 2004 Type A

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
pH 10.0 – 11.0
Reserve Alkalinity (mL 0.1N HCI) 10.0 min.
Specific Gravity (15°C) 1.05 – 1.145
Freeze Point -19°C
Foaming Properties – Volume (mL) 50 max.
Foaming Properties – Break Time 5 max.
Odour Characteristic
Colour Green
Shelf Life 2 years
Total Glycol (weight %) 30.0 min.
Total Apparent Water (weight %) 70.0 max.

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL

PEAK BLUE LONG LIFE COOLANT CONCENTRATE

PEAK BLUE LONG LIFE COOLANT CONCENTRATE

PKROLLBC001_HR
PKROLLBC001_REAR_HR
PKROLLBC005_HR
PKROLLBC005_REAR_HR
PKROLLBC020_HR
PKROLLBC001_HR PKROLLBC001_REAR_HR PKROLLBC005_HR PKROLLBC005_REAR_HR PKROLLBC020_HR
PRODUCT CODE PACK SIZE CTN QTY
PKROLLBC001 1 Litre 12
PKROLLBC005 5 Litre 4
PKROLLBC020 20 Litre
PKROLLBC205 205 Litre

PRODUCT DESCRIPTION

PEAK BLUE LONG LIFE COOLANT CONCENTRATE is an Ethylene Glycol OAT based coolant formulated with a proprietary corrosion inhibitor package. This is Silicate, Borate, Phosphate, Amine, and Nitrate free providing ideal protection for all engine metals including aluminum and ferrous alloys for up to 5 years.

PEAK BLUE LONG LIFE COOLANT CONCENTRATE provides anti-freeze and anti-boil additives that provide the best balance of protection against freezing, corrosion, and overheating. Suitable for use in diesel trucks, buses, agricultural and earthmoving applications as well as passenger cars and stationary engines.

BENEFITS

  • Silicate, Borate, Phosphate, Amine, and Nitrite free
  • Excellent choice for use in mixed fleets
  • Long drain intervals
  • Compatible with all plastics, rubbers, seals, and aluminium

Note: Not to be used in concentrated form

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ASTM D-3306
  • ASTM D-6210
  • ASTM D-4985
  • SAE J1034
  • AS/NZS 2108.1 Coolant Type A 2004
  • John Deere JDM H24B1 / C1
  • Ford WSS-M97B44-C
  • GM1825M/ 1899M
  • Cummins 90T8-4
  • J.I. Case JIC501

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 1.1
Boiling Point °C (not mixed) 170
Flash Point °C (not mixed) >120
Colour Blue
DOSE RATE FREEZING POINT BOILING POINT
Mixture ratio 33% 50%
Freezing Point °C -19 -37
Boiling Point °C 125 127

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK GREEN LONG LIFE COOLANT CONCENTRATE

PEAK GREEN LONG LIFE COOLANT CONCENTRATE

PKROLLGC001_HR
PKROLLGC001_REAR_HR
PKROLLGC005_HR
PKROLLGC005_REAR_HR
PKROLLGC020_HR
PKROLLGC001_HR PKROLLGC001_REAR_HR PKROLLGC005_HR PKROLLGC005_REAR_HR PKROLLGC020_HR
PRODUCT CODE PACK SIZE CTN QTY
PKROLLGC001 1 Litre 12
PKROLLGC005 5 Litre 4
PKROLLGC020 20 Litre
PKROLLGC205 205 Litre

PRODUCT DESCRIPTION

PEAK GREEN LONG LIFE COOLANT CONCENTRATE is an Ethylene Glycol OAT based coolant formulated with a proprietary corrosion inhibitor package. This is Silicate, Borate, Phosphate, Amine, and Nitrate free providing ideal protection for all engine metals including aluminium and ferrous alloys for up to 5 years.

PEAK GREEN LONG LIFE COOLANT CONCENTRATE provides anti-freeze and anti-boil additives that provide the best balance of protection against freezing, corrosion, and overheating. Suitable for use in diesel trucks, buses, agricultural and earthmoving applications as well as passenger cars and stationary engines.

BENEFITS

  • Silicate, Borate, Phosphate, Amine, and Nitrite free
  • Excellent choice for use in mixed fleets
  • Long drain intervals
  • Compatible with all plastics, rubbers, seals, and aluminium

Note: Not to be used in concentrated form

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ASTM D-3306
  • ASTM D-6210
  • ASTM D-4985
  • SAE J1034
  • AS/NZS 2108.1 Coolant Type A 2004
  • John Deere JDM H24B1 / C1
  • Ford WSS-M97B44-C
  • GM1825M/ 1899M
  • Cummins 90T8-4
  • J.I. Case JIC501

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 1.1
Boiling Point °C (not mixed) 170
Flash Point °C (not mixed) >120
Colour Green
DOSE RATE FREEZING POINT BOILING POINT
Mixture ratio 33% 50%
Freezing Point °C -19 -37
Boiling Point °C 125 127

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK 20W50

PEAK 20W50

PKEM2050001--1000x1000
PKEM2050001_REAR-1000x1000
PKEM2050005_HR
PKEM2050005_REAR_HR
PKEM2050020_HR
PKEM2050001--1000x1000 PKEM2050001_REAR-1000x1000 PKEM2050005_HR PKEM2050005_REAR_HR PKEM2050020_HR
Product Code Pack Size QTY
PKEM2050001 1 Litre 6
PKEM2050005 5 Litre 4
PKEM2050020 20 Litre
PKEM2050205 205 Litre

PRODUCT DESCRIPTION

PEAK 20W50 is a high-quality engine oil formulated with a combination of advanced mineral base oils and high-performance additives making it suitable for engines requiring API SN, ACEA A3 / B4.

PEAK 20W50 is recommended for petrol engines (multi-valve and turbo) with or without a catalytic converter.

BENEFITS

  • Engine seals stay soft and pliable to minimize and reduce oil leakages
  • Excellent detergent additives to improve engine cleanliness
  • Outstanding shear stability
  • Outstanding thermal and oxidation stability

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API SN

  • ACEA A3 / B4

  • VW 501 01/505 00

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.881
Viscosity 40°C cSt 150.9
Viscosity 100°C cSt 17.18
Viscosity Index 123.7
Flash Point °C >220
Colour L 2.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK BLUE HANDCLEANER

PEAK BLUE CITRASOFT HANDCLEANER

PKSHC001_HR
PKSHC005-1000x1000-1
PKSHC005_REAR-1000x1000
PKSHC020
PKSHC001_HR PKSHC005-1000x1000-1 PKSHC005_REAR-1000x1000 PKSHC020
Product Code Pack size CTN QTY
PKSHC001 1 Litre 6
PKSHC005 5 Litre 4
PKSHC020 20 Litre

DESCRIPTION & APPLICATION

PEAK BLUE HANDCLEANER consists of a balanced blend of highly biodegradable anionic and non anionic surface active agents and polyethylene beads specifically designed for mild abrasive action.

PEAK BLUE HANDCLEANER does not contain hydrocarbons and pumice. Add small quantity to
soiled hands preferably by way of a pump dispenser, rub well into soiled area then wash off with warm or
cold water.

BENEFITS

  • Excellent for cleaning grime and dirt
  • Non Toxic
  • Non Corrosive
  • Biodegradable and environmentally friendly

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL

PEAK POWER STEERING FLUID

PEAK POWER STEERING FLUID

PKPSF.500_HR
PKPSF001_HR
PKPSF.500_HR PKPSF001_HR
Product Code Pack size CTN QTY
PKPSF.500 500mL 6
PKPSF001 1 Litre 6

DESCRIPTION & APPLICATION

PEAK POWER STEERING FLUID is formulated for use in the majority of passenger cars and light commercial
power steering systems. It will provide smooth year-round protection and will assist in preventing corrosion,
oxidation, gear slippage, and wear. PEAK POWER STEERING FLUID is dyed red for easy identification.

NOTE: Do not use where specialist fluids are specified. E.g. Honda, SAAB, Mercedes benz.

PEAK POWER STEERING FLUID is formulated with anti-foam additives and corrosion and oxidation inhibitors. It
is compatible with a wide range of seal materials and will protect metal components used in modern power
steering systems.

PEAK POWER STEERING FLUID can be used to top up existing fluids in power steering systems and is suitable
to be used for year-round performance.

BENEFITS

  • Formulated with anti foam additives and corrosion and oxidation inhibitors
  • Compatible with a wide range of seal materials
  • Will protect metal components used in modern power steering systems
  • Can be used to top up existing fluids

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density @ 15°C, kg/L 0.87 kg/L
Viscosity cSt @ 40°C 44.5 cSt
Viscosity cSt @ 100°C 8 cSt
Viscosity Index 150
Pour Point °C -42 °C
Flash Point °(COC) 193 °C
Appearance Red Oily Liquid

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPSC.325

PEAK POWER STEERING CLEANER

PKES1040005

PEAK 10W40

PKTMD3005_HR-3

PEAK ATF DX3

PKBFD3001

PEAK BRAKE FLUID DOT 3

PEAK 85W140

PEAK 85W140

PKGM85140001_HR
PKGM85140002.5_HR
PKGM8514002.5_REAR
PKGM85140005_HR
PKGM85140020
PKGM85140001_HR PKGM85140002.5_HR PKGM8514002.5_REAR PKGM85140005_HR PKGM85140020
PRODUCT CODE PACK SIZE CTN QTY
PKGM85140001 1 Litre 12
PKGM8514002.5 2.5 Litre 6
PKGM85140005 5 Litre 4
PKGM85140020 20 Litre
PKGM85140060 60 Litre
PKGM85140205 205 Litre

DESCRIPTION & APPLICATION

PEAK 85W140 is a heavy-duty multi-grade gear lubricant containing extreme pressure
additives formulated to provide the highest protection when operating in very severe
conditions.

PEAK 85W140 for use in differentials fitted to modern-day passenger cars and light
commercials vehicles, agricultural and industrial applications, suitable for gears
including helical, spiral bevel, and hypoid to minimize scuffing, welding, or galling tooth
wear in severe load applications.

BENEFITS

  • Protection over a wide temperature range
  • High quality extreme pressure additives for added protection under heavy load
  • Good corrosion protection and rust prevention for longer component life
  • Excellent wear protection

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-5
  • Rockwell 076
  • Mack: GO-J
  • Clark MS-8
  • International Harvester B-22
  • SAE J2360
  • MS-0016
  • US Military: MIL-L-2105 D

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.901
Viscosity 40°C cSt 280
Viscosity 100°C cSt 26.5
Viscosity Index 124
Flash Point °C >215
Colour L 2.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH