PEAK RADIATOR FLUSH

Product Code	Pack Size	CTN QTY
PKADPRF.325	325 ML	12

PRODUCT DESCRIPTION

PEAK Radiator Flush is a non-acidic radiator flush containing organic salts. It safely removes
scum, oily residue, sediments, rust, deposits and other degradation products from the cooling
system.

PEAK Radiator Flush will not harm metals, plastics, rubber seals or gaskets in engine cooling
systems of petrol, diesel, gas fuelled vehicles, trucks, buses, tractors, and heavy machinery

BENEFITS

- Contains corrosion inhibitors
- Easy to use
- Maximises cooling system efficiency
- Quickly and safely removes scum, oily residue, sediments, rust, deposits and other
  degradation products from the cooling system
- Requires no neutralizers
- Safe for all cooling systems including aluminium radiators

TYPICAL CHARACTERISTICS*

TEST	TYPICAL VALUE
Specific Gravity	1.1 (+/- 0.05)
Boiling Point °C	>106
pH	12-13
Physical State	Liquid
Colour	Blue

HOW TO USE:

- Ensure engine cooling system is cold prior to starting to prevent risk of burns.
- Drain cooling system completely, then fill system with water and PEAK Radiator Flush at a dose rate of Between 2.5 – 5% in water (between 250ml
  and 500ml per 10 Litres of cooling system capacity).
- Start the engine while idling making sure that the heater is turned on and run for 20 minutes.
- Allow the system to cool, drain and flush thoroughly with water.
- Refill the system with fresh water and inspect for leaks, tighten loose hose clamps and bolts were necessary.
- Drain and then refill the cooling system with the recommended PEAK coolant