PEAK RED RUBBER GREASE

Red Rubber Grease

PKGXRRG.500-hr
PKGXRRG.500-hr
PRODUCT CODE PACK SIZE CTN QTY
PKGXRRG.500 500g

PRODUCT DESCRIPTION

PEAK RED RUBBER Grease is premium quality clay thickened grease formulated with Castor Oil. The grease is specifically formulated for a wide range of automotive and industrial applications where contact with natural and/or synthetic rubber components is required or likely. These include hydraulic dust covers, braking system components, seals, washers, stoppers, tyre rims etc.

PEAK RED RUBBER Grease will not adversely affect rubber parts therefore preventing excessive softening or hardening.

BENEFITS

  • Compatible with natural & synthetic rubbers
  • Excellent lubricity
  • Easy to apply
  • Protects against rust and corrosion
  • Environmentally Friendly Ingredients

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
NLGI Grade 2
Soap/Thickener Type Inorganic Clay
Dropping point °C >280
Oil Viscosity 40°C cSt 250
Operating Temperature Range °C -10 to 80
Colour Red

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPDET.130

PEAK DIESEL EGR TREATMENT

PKSTW005_HR

PEAK TRUCK WASH

PKSBC020

PEAK BRAKE CLEANER

PKSPW0020

PEAK PARTS WASH

PEAK LOMA HVI 15

PEAK LOMA HVI 15

Generic 20L
Generic 20L
PRODUCT CODE
PKIHH015020 20 Litre
PKIHH015205 205 Litre
PKIHH0151000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA HVI 15 is a high-performance, high viscosity index, anti-wear hydraulic oil
formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors and
anti-foam additives.

PEAK LOMA HVI 15 is a thermally stable fluid and the High Viscosity Index characteristics
provide a stable fluid over wide variations in ambient and operating temperatures. It is
compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 15 meets the requirements of the following pump manufacturers: Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison, Oilgear, Cincinnati Milacron

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating
    temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced
    maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through
    prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 15 is not suitable for use with pumps containing silver plated
components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.850
Viscosity 40°C cSt 20.8
Viscosity 100°C cSt 4.6
Viscosity Index 140
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 320

PEAK LOMA 320

PKIHM320020
PKIHM320020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM320020 20 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 320 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 320 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 220

PEAK LOMA 220

PKIHM220020
PKIHM220020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM220020 20 Litre
PKIHM220205 205 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 220 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 220 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12
TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA HVI 68

PEAK LOMA HVI 68

PKIHH068020
PKIHH068020
PRODUCT CODE PACK SIZE CTN QTY
PKIHH068020 20 Litre
PKIHH068205 205 Litre
PKIHH0681000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA HVI 68 is a high-performance, high viscosity index, anti-wear hydraulic oil
formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors
and anti-foam additives.

PEAK LOMA HVI 68 is a thermally stable fluid and the High Viscosity Index characteristics
provide a stable fluid over wide variations in ambient and operating temperatures. It is
compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 68 meets the requirements of the following pump manufacturers:
Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers,
Sunstrand, Denison, Oilgear, Cincinnati Milacron.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 68 is not suitable for use with pumps containing silver plated components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Cincinnati Milacron P69
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.862
Viscosity 40°C cSt 73.2
Viscosity 100°C cSt 11.0
Viscosity Index >150
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 150

PEAK LOMA 150

PKIHM150020
PKIHM150020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM150020 20 Litre
PKIHM150205 205 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 150 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA 150 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron and more

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 150 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136 / 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.888
Viscosity 40°C cSt 150
Viscosity 100°C cSt 14.5
Viscosity Index 110
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 100

PEAK LOMA 100

PKIHM100020
PKIHM100020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM100020 20 Litre
PKIHM100205 205 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 100 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

PEAK LOMA 100 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron, and more.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 100 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.873
Viscosity 40°C cSt 98.4
Viscosity 100°C cSt 11.8
Viscosity Index 107
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 68

PEAK LOMA 68

PKIHM068005_HR
PKIHM068020
PKIHM068005_HR PKIHM068020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM068005 5 Litre
PKIHM068020 20 Litre
PKIHM068205 205 Litre
PKIHM0681000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 68 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves and seal materials are used in hydraulic systems.

PEAK LOMA 68 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron and more.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 68 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136 / 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.866
Viscosity 40°C cSt 64.0
Viscosity 100°C cSt 8.8
Viscosity Index 110
Flash Point °C >215
Colour L 2.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 32

PEAK LOMA 32

PKIHM032005
PKIHM032005-REAR
PKIHM032020
PKIHM032005 PKIHM032005-REAR PKIHM032020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM032005 5 Litre 4
PKIHM032020 20 Litre
PKIHM032205 205 Litre
PKIHM0321000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 32 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA 32 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 32 is not suitable for use with pumps containing silver plated components due to the zinc anti wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136 / 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.854
Viscosity 40°C cSt 31.0
Viscosity 100°C cSt 5.7
Viscosity Index 118
Flash Point °C >205
Colour L 1.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT

PEAK LOMA 22

PEAK LOMA 22

PKIHM022020
PKIHM022020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM022020 20 Litre
PKIHM022205 205 Litre
PKIHM0221000 1000 Litre

DESCRIPTION & APPLICATION

PEAK LOMA 22 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA 22 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron and more

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 22 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136 / 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.850
Viscosity 40°C cSt 22.0
Viscosity 100°C cSt 4.3
Viscosity Index 116
Flash Point °C >200
Colour L 1.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050

SPILL FIX ABSORBENT