08 Apr
POWER STEERING FLUIDS, SPECIALTIES

PEAK LHM FLUID

PEAK LHM FLUID

PKPML001_HR
PKPML001_REAR_HR
PKPML001_HR PKPML001_REAR_HR
PRODUCT CODE PACK SIZE CTN QTY
PKPML001 1 Litre 12

SDSPDS

PRODUCT DESCRIPTION

PEAK LHM FLUID is a high-performance Mineral Hydraulic Fluid engineered for wide coverage and capabilities where used as recommended in brake, hydraulic, or power steering systems of many vehicle and equipment manufacturers. It may be used in Citroen hydraulic systems where the hydraulic reservoir is painted green, and used in brakes suspension and power steering. 

PEAK LHM FLUID utilises Global Technology Additives which have completed exhaustive OEM research and development. This product has an exceptionally high viscosity index, low pour point, and very high boiling point giving it superior performance across extreme temperature variations. It exhibits excellent seal compatibility, is non-corrosive, and does not naturally attract moisture. 

CAUTION: This product must not be mixed with conventional brake fluids like DOT 3, DOT 4, DOT 5, or LHS. It may however be mixed with other fluids meeting LHM or LHM PLUS specifications.

BENEFITS

  • Compatible with LHM or LHM PLUS

  • French, European, and other vehicles were specified

  • Brake Fluid – Construction Equipment

  • Brake Fluid – Tractors and other farm equipment

  • Passenger cars & Light Commercial Vehicles where specified

  • Long service life

  • Exceptional all-climate performance

SPECIFICATIONS AND PERFORMANCE LEVEL

  • PSA Citroen B71 2710

  • Renault B71 2710

  • Rolls Royce / Bentley

  • Jaguar  XJS

  • BMW 

  • ISO  7308

  • Rover

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Boiling Point °C (not mixed)
Flash Point °C (not mixed)
Colour

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPSC.325

PEAK POWER STEERING CLEANER

PKES1040005

PEAK 10W40

PKTMD3005_HR-3

PEAK ATF DX3

PKBFD3001

PEAK BRAKE FLUID DOT 3

25 Mar
LOMA ZF

PEAK LOMA ZF 32

PEAK LOMA ZF 32

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHMZF032020 20 Litre
PKIHMZF032205 205 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA ZF 32 is a high-performance, Zinc-Free, anti-wear hydraulic oil formulated using
highly refined base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam
additives. The result is a thermally stable fluid capable of handling high loads and
temperatures. It is compatible with most pumps, valves and seal materials used in hydraulic
systems.

PEAK LOMA ZF 32 is also suitable for general industrial equipment, machine tools, rotary air
compressors, torque converters and enclosed gearboxes and where extreme pressure oils are
not required. Specifically developed for use with pumps containing silver plated components
due to the use of zinc-free anti wear additives

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and
    provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced
    maintenance
  • Enhanced air release and anti-foam properties that prevent cavitation.
  • Excellent water separation and hydrolytic stability means reduced down time through
    prolonged lubricant life and improved equipment performance.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ISO 6743 / 4 (HM)
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 126
  • AFNOR NF E 48-603 (HM)

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application,
talk with our expert technical staff today.

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

22 Mar
HYDRAULIC OIL, LOMA HVI

PEAK LOMA HVI 15

PEAK LOMA HVI 15

Generic 20L
Generic 20L
th style="text-align:center;">CTN QTY
PRODUCT CODE PACK SIZE
PKIHH022020 20 Litre
PKIHH022205 205 Litre
PKIHH0221000 1000 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA HVI 15 is a high-performance, high viscosity index, anti-wear hydraulic oil
formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors and
anti-foam additives.

PEAK LOMA HVI 15 is a thermally stable fluid and the High Viscosity Index characteristics
provide a stable fluid over wide variations in ambient and operating temperatures. It is
compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 15 meets the requirements of the following pump manufacturers: Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison, Oilgear, Cincinnati Milacron

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating
    temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced
    maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through
    prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 15 is not suitable for use with pumps containing silver plated
components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.850
Viscosity 40°C cSt 20.8
Viscosity 100°C cSt 4.6
Viscosity Index 140
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

22 Mar
LOMA

PEAK LOMA 320

PEAK LOMA 320

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHM320020 20 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA 320 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 320 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

22 Mar
HYDRAULIC OIL, LOMA

PEAK LOMA 220

PEAK LOMA 220

Generic 20L
Generic 20L
PRODUCT CODE PACK SIZE CTN QTY
PKIHM220020 20 Litre
PKIHM220205 205 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA 220 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 220 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 12
TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C >
Colour

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

22 Feb
ADVANCED MINERAL, HEAVY DUTY DIESEL OILS

PEAK FARM OIL 15W40

PEAK FARM OIL 15W40

PKDMFO005_HR
PKDMFO005_REAR_HR
PKDMFO0020_HR
PKDMFO005_HR PKDMFO005_REAR_HR PKDMFO0020_HR
Product Code Pack size CTN QTY
PKDMFO005 5 Litre 4
PKDMFO020 20 Litre
PKDMFO205 205 Litre

SDSPDS

DESCRIPTION & APPLICATION

PEAK FARM OIL 15W40 is a multi-purpose lubricant suitable for a wide range of farming vehicles and equipment.
It can be used in petrol and diesel engines, transmissions, oil-immersed wet brakes, and hydraulic systems
associated with powered and PTO equipment used in the agricultural industry.

PEAK FARM OIL 15W40 provides a rationalization in the range of lubricants required on a farm, without
sacrificing lubrication, protection, and equipment performance.

PEAK FARM OIL 15W40 will provide protection for 4-stroke petrol, naturally aspirated, and light turbocharged
diesel engines while maintaining a high level of engine cleanliness. Hydraulic systems are protected using
anti-wear additives and shear stable viscosity modifiers, providing long fluid and equipment life and reliable
cold temperature performance. It has frictional properties to ensure the squawk-free operation of wet brakes
and is thermally stable to completely protect transmissions and gearboxes.

PEAK FARM OIL 15W40 offers reduced costs through rationalizing the lubricants required on hand and makes
lubricant selection easier as it meets the specifications called for by most manufacturers. Suitable for where
a 75W, 80W, or 90W GL4 gear is required.

BENEFITS

  • Multi-purpose lubricant suitable for a wide range of farming vehicles and equipment
  • Provide’s fuel efficiency, high wear protection, and long drain capability
  • Reduce’s engine wear and control piston deposits and oil consumption
  • Formulated to protect exhaust after-treatment devices such as diesel particulate filters (DPFs)

SPECIFICATIONS AND PERFORMANCE LEVEL

  • SAE Viscosity: 15W/40
  • API CF/CE/SG/GL4
  • MIL-L-46152D, 2104D
  • Allison C4
  • Caterpillar TO-2
  • Ford/NH M2C-159A, 159B
  • John Deere J20C, J27A/HYGARD
  • Massey Ferguson M-1139, M-1144
  • MB 227.1
  • Mack EO-K/2
  • Case JIC 185. MS 1206

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density @ 15°C, kg/L 0.889 kg/L
Viscosity cSt @ 40°C 115 cSt
Viscosity cSt @ 100°C 13.8 cSt
Viscosity Index 115
Flash Point °(COC) 232
Pour Point °C -27 °C
Sulphated Ash % 1.4

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPDPFC.325_HR

PEAK DPF CLEANER

PKADPDIC.325_HR

PEAK DIESEL INJECTOR CLEANER

PKADDEF010

PEAK AdBlue® DIESEL EXHAUST FLUID

PKSTW005_HR

PEAK TRUCK WASH

14 Feb
LOMA HVI

PEAK LOMA HVI 100

PEAK LOMA HVI 100

PKIHH100020_HR
PKIHH100020_HR
PRODUCT CODE PACK SIZE CTN QTY
PKIHH100020 20 Litre
PKIHH100205 205 Litre
PKIHH1001000 1000 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA HVI 100 is a high-performance, high viscosity index, anti-wear hydraulic oil formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives.

PEAK LOMA HVI 100 is a thermally stable fluid and the High Viscosity Index characteristics provide a stable fluid over wide variations in ambient and operating temperatures. It is compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 100 meets the requirements of the following pump manufacturers: Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison, Oilgear, Cincinnati Milacron.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 100 is not suitable for use with pumps containing silver plated components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.870
Viscosity 40°C cSt 102.1
Viscosity 100°C cSt 14.2
Viscosity Index >142
Flash Point °C >210

Find the Smarter product for your application,
talk with our expert technical staff today.

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

14 Feb
HYDRAULIC OIL, LOMA HVI

PEAK LOMA HVI 68

PEAK LOMA HVI 68

PKIHH068020
PKIHH068020
PRODUCT CODE PACK SIZE CTN QTY
PKIHH068020 20 Litre
PKIHH068205 205 Litre
PKIHH0681000 1000 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA HVI 68 is a high-performance, high viscosity index, anti-wear hydraulic oil
formulated using highly refined base oils with anti-wear, oxidation and corrosion inhibitors
and anti-foam additives.

PEAK LOMA HVI 68 is a thermally stable fluid and the High Viscosity Index characteristics
provide a stable fluid over wide variations in ambient and operating temperatures. It is
compatible with most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA HVI 68 meets the requirements of the following pump manufacturers:
Hagglund, Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers,
Sunstrand, Denison, Oilgear, Cincinnati Milacron.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Outstanding thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA HVI 68 is not suitable for use with pumps containing silver plated components due to the zinc anti wear additives.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • Cincinnati Milacron P69
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51524 Part 3 (HVLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 127 / 136

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.862
Viscosity 40°C cSt 73.2
Viscosity 100°C cSt 11.0
Viscosity Index >150
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

14 Feb
HYDRAULIC OIL, LOMA

PEAK LOMA 150

PEAK LOMA 150

PKIHM150020
PKIHM150020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM150020 20 Litre
PKIHM150205 205 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA 150 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves and seal materials used in hydraulic systems.

PEAK LOMA 150 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron and more

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability mean reduced downtime through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 150 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136 / 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.888
Viscosity 40°C cSt 150
Viscosity 100°C cSt 14.5
Viscosity Index 110
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

14 Feb
HYDRAULIC OIL, LOMA

PEAK LOMA 100

PEAK LOMA 100

PKIHM100020
PKIHM100020
PRODUCT CODE PACK SIZE CTN QTY
PKIHM100020 20 Litre
PKIHM100205 205 Litre

SDS  PDS

DESCRIPTION & APPLICATION

PEAK LOMA 100 is a high-performance, anti-wear hydraulic oil formulated using highly refined
base oils with anti-wear, oxidation and corrosion inhibitors, and anti-foam additives, resulting in
a thermally stable fluid capable of handling high loads and temperatures, it is compatible with
most pumps, valves, and seal materials are used in hydraulic systems.

PEAK LOMA 100 meets the requirements of the following pump manufacturers: Hagglund,
Rexroth, Danfoss, Linde, Commercial Hydraulics, Bosch, Racine, Vickers, Sunstrand, Denison,
Oilgear, Cincinnati Milacron, and more.

BENEFITS

  • Excellent wear and corrosion protection, ensuring good equipment life and decreased
    downtime
  • Good thermal and oxidation stability characteristics permit higher operating temperatures and provide long fluid life.
  • Excellent filterability to prevent filter blockages delivering increased filter life and reduced maintenance
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and improved equipment performance.

NOTE: PEAK LOMA 100 is not suitable for use with pumps containing silver plated components due to the zinc anti-wear additives.

SPECIFICATIONS & PERFORMANCE LEVEL

  • Cincinnati Milacron P68 / P69 / P70
  • Denison HF-0 / HF-1 / HF-2
  • DIN 51 524 Part 2 (HLP)
  • Vickers 1-286-S / M2952-S
  • US Steel 136, 127

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.873
Viscosity 40°C cSt 98.4
Viscosity 100°C cSt 11.8
Viscosity Index 107
Flash Point °C >210

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKGXUP.450

PEAK ULTRA PLANT XHD

PKDMM40020

PEAK MULTI DUTY DD40

PKIGF0068020

PEAK SYN TORA 68

AB050_HR

SPILL FIX ABSORBENT

12345