PEAK TRANSGEAR XP 80

PEAK TRANSGEAR XP80

PKGM7580020
PKGM7580020
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580001 1 Litre 6
PKGM7580020 20 Litre
PKGM7580060 60 Litre
PKGM7580205 205 Litre

DESCRIPTION & APPLICATION

PEAK TRANSGEAR XP 80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK TRANSGEAR XP 80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK TRANSGEAR XP 80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK TRANSGEAR XP 80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK TRANGEAR XP 80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK 75W80

PEAK 75W80

PKGM7580005_HR
PKGM7580005_HR
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580005 5 Litre 4

DESCRIPTION & APPLICATION

PEAK 75W80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK 75W80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK 75W80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK 75W80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK 75W80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK ATF DX3

PREMIUM MINERAL TRANSMISSION FLUID

PEAK ATF DX3 Fluid is formulated premium mineral base oil combined with the highest quality additives in order to satisfy the latest transmission designs

PEAK ATF DX3 Fluid is designed for use in passenger cars, 4WD’s and light commercial vehicles where GM Dexron-II® and Ford Mercon® fluids have been specified. The improved low temperature properties and excellent retention of frictional coefficient ensures consistently smooth shifts, both at cold start and under extreme operating conditions, it also suitable for Hydrostatic transmissions, Power steering systems and Hydraulic systems.

PEAK 15W40

PEAK 15W40

PKEM1540001_HR
PKEM1540005_HR
PKEM1540005_REAR_HR
PKEM1540020_HR
PKEM1540001_HR PKEM1540005_HR PKEM1540005_REAR_HR PKEM1540020_HR
Product Code Pack size CTN QTY
PKEM1540001 1 Litre 6
PKEM1540005 5 Litre 4
PKEM1540020 20 Litre
PKEM1540205 205 Litre

PRODUCT DESCRIPTION

PEAK 15W40 is an advanced mineral technology high-performance multi-grade, low viscosity engine oil formulated to provide wide temperature range engine protection that is required by API SN/CF. It is specially formulated to provide extra protection against the harmful effects of stop-and-go driving and high and low-temperature engine operation. 

PEAK 15W40 is recommended for all petrol engines fitted with multi-valve and multi-cam cylinder heads, turbos, superchargers, and where computer-controlled engine management systems are fitted. Also suited for vehicles with or without catalytic converters and is ideal for L.P.G /  C.N.G and Dual fuel engines. The perfect choice for light-duty diesel turbocharged and naturally aspirated engines in passenger cars, light commercials, and SUVs / 4WDs. We recommend this lubricant for all vehicles where a 15W40 SN CF engine oil is specified. NOT suitable for diesel’s fitted with Diesel Particulate Filters (DPF)

PEAK 15W40 is a popular viscosity and is highly recommended for later models vehicles. It is a premium mid viscosity range engine oil that suits a wide variety of vehicles including many new and most mid-year modern petrol vehicles and those fitted with dedicated gas or using dual-fuel including E10 and E85. It suits modern 4, 6, and 8 cylinder engines, including many Australian, Japanese, Asian, US, and European vehicles. Suitable for Light Duty Diesel engines in passenger cars, 

PEAK 15W40 is formulated with a high level of detergency / dispersancy minimising formulation of low-temperature sludge leading to cleaner engines. Advanced Mineral Technology offers total engine protection during the three stages of the drive cycle – start-up, warm-up, and normal operating conditions. It provides excellent thermal and oxidation stability, freedom of ring sticking, and reduction in deposits leading to reduced engine wear and a longer engine and component life.

BENEFITS

  •  Engine seals stay soft and pliable to minimise and reduce oil leakages 

  •  Excellent detergent additives to improve engine cleanliness 

  •  Outstanding thermal and oxidation stability 

  • NOT suitable for diesels fitted with Diesel Particulate Filters (DPF)

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API   SN

  • ACEA A3/B4

  • ACEA A3/B3-12
  • VW 501 01/505 00

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³  0.8
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index 1
Flash Point °C >2
Colour L

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK 25W70

PEAK 25W70

PKEM2570005_HR
PKEM2570005_REAR_HR
PKEM257020
PKEM2570005_HR PKEM2570005_REAR_HR PKEM257020
Product Code Pack Size QTY
PKEM2570005 5 Litre 4
PKEM2570020 20 Litre
PKEM2570205 205 Litre

PRODUCT DESCRIPTION

PEAK 25W70 is an exceptionally high viscosity multi-grade engine lubricant. It is formulated for use in worn and older style passenger vehicles, light commercials, and other large 4 stroke engines, or where a high viscosity engine oil is preferred due to harsh operating conditions.

PEAK 25W70 is an excellent choice for older engines with high mileage. It will assist to increase oil pressure, controlling oil consumption, reducing engine noise, reduce oil burning and smoke emissions.

BENEFITS

  • Will assist to increase oil pressure

  • Control oil consumption, and reduce engine noise

  • Reduce oil burning and smoke emissions

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API SL/CF

  • ACEA A2/B2

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index
Flash Point °C
Colour
Sulphated Ash

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK 20W50

PEAK 20W50

PKEM2050001--1000x1000
PKEM2050001_REAR-1000x1000
PKEM2050005_HR
PKEM2050005_REAR_HR
PKEM2050020_HR
PKEM2050001--1000x1000 PKEM2050001_REAR-1000x1000 PKEM2050005_HR PKEM2050005_REAR_HR PKEM2050020_HR
Product Code Pack Size QTY
PKEM2050001 1 Litre 6
PKEM2050005 5 Litre 4
PKEM2050020 20 Litre
PKEM2050205 205 Litre

PRODUCT DESCRIPTION

PEAK 20W50 is a high-quality engine oil formulated with a combination of advanced mineral base oils and high-performance additives making it suitable for engines requiring API SN, ACEA A3 / B4.

PEAK 20W50 is recommended for petrol engines (multi-valve and turbo) with or without a catalytic converter.

BENEFITS

  • Engine seals stay soft and pliable to minimize and reduce oil leakages
  • Excellent detergent additives to improve engine cleanliness
  • Outstanding shear stability
  • Outstanding thermal and oxidation stability

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API SN

  • ACEA A3 / B4

  • VW 501 01/505 00

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.881
Viscosity 40°C cSt 150.9
Viscosity 100°C cSt 17.18
Viscosity Index 123.7
Flash Point °C >220
Colour L 2.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK GAS

PEAK GAS 15W40

PKEMGAS005_HR
PKEMGAS020_HR
PKEMGAS005_HR PKEMGAS020_HR
Product Code Pack size CTN QTY
PKEMGAS005 5 Litre 4
PKEMGAS020 20 Litre
PKEMGAS205 205 Litre

PRODUCT DESCRIPTION

PEAK GAS is a high-quality engine oil formulated with advanced mineral base oils and high-performance additives making it suitable for engines requiring API SN and ACEA A3 / B4.

PEAK GAS is recommended for dual-fuel engines (multivalve and turbo) with or without a catalytic converter. This product is suitable for diesel vehicles.

BENEFITS

  • Engine seals stay soft and pliable to minimise and reduce oil leakages
  • Excellent detergent additives to improves engine cleanliness
  • Outstanding thermal and oxidation stability

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API SN
  • ACEA A3/B4
  • ACEA A3/B3-12
  • VW 501 01/505 00

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³  0.8
Viscosity 40°C cSt
Viscosity 100°C cSt
Viscosity Index 1
Flash Point °C >2
Colour L

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPEF.325_HR-1

ENGINE FLUSH

PKRC4SP005_HR

PEAK READY TO USE COOLANT

PKTMMF005_HR

PEAK ATF MULTI

PKSWC005_HR

PEAK CLEAN-A-SCREEN

PEAK GUN DRILL OIL NEAT (ISO GRADES 15, 22, 68)

PEAK GUN DRILL OIL NEAT

PKICMGDO015020
PKICMGDO015020

PEAK GUN DRILL OIL NEAT 15

Product Code Pack size CTN QTY
PKICMGDO015205 205 Litre

PEAK GUN DRILL OIL NEAT 22

Product Code Pack size CTN QTY
PKICMGDO022205 205 Litre

PEAK GUN DRILL OIL NEAT 68

Product Code Pack size CTN QTY
PKICMGDO068205 205 Litre

DESCRIPTION & APPLICATION

PEAK GUN DRILL OIL NEAT is an extreme pressure mineral non-soluble cutting oil with low odour
characteristics for the machine operator’s comfort. It contains an extreme pressure additive system, rust
and anti-foam additives for long tool life, good heat transfer and surface finish.

PEAK GUN DRILL OIL NEAT is designed for heavy-duty machining such as deep hole drilling, tapping,
broaching and threading of high carbon alloy and stainless steel.

MAY STAIN NON-FERROUS METALS and does not contain active phosphorous or chlorine extreme
pressure materials.

BENEFITS

  • Improved surface finish on metals
  • Increased tool life
  • Faster and more efficient machining
  • Excellent swarf flushing properties

TYPICAL CHARACTERISTICS - GUN DRILL OIL NEAT 15

TEST TYPICAL VALUE
ISO VG GRADE 15
Viscosity @ 40°C cSt 14.5
Viscosity @ 100°C cSt 3.5
Color Dark Amber

TYPICAL CHARACTERISTICS - GUN DRILL OIL NEAT 22

TEST TYPICAL VALUE
ISO VG GRADE 22
Viscosity @ 40°C cSt 24
Viscosity @ 100°C cSt 4.8
Color Dark Amber

TYPICAL CHARACTERISTICS - GUN DRILL OIL NEAT 68

TEST TYPICAL VALUE
ISO VG GRADE 68
Viscosity @ 40°C cSt
Viscosity @ 100°C cSt
Color Dark Amber

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKIHM046005_HR

PEAK LOMA 46

PKIAM068005_HR

PEAK AC 68 COMPRESSOR OIL

PKISM032020

PEAK BRAE 32

PKIMM046020

PEAK JAY 46

PEAK 75W85

PEAK 75W85

PKGS758502.5_HR
PKGS758502.5_REAR_HR
PKGS7585020
PKGS758502.5_HR PKGS758502.5_REAR_HR PKGS7585020
PRODUCT CODE PACK SIZE CTN QTY
PKGS758502.5 2.5 Litre 4
PKGS7585020 20 Litre
PKGS7585060 60 Litre
PKGS7585205 205 Litre

DESCRIPTION & APPLICATION

PEAK 75W85 uses a blend of synthetic and high-quality mineral base fluids. The 75W85
viscosity assists with cold gear changes and provides gear protection at high operating
temperatures.

PEAK 75W85 is suitable for manual gearboxes, transfer cases, and transaxles in passenger cars,
4WDs and trucks that specify the use of a 75W85 oil meeting API GL-4, it is also suitable for
electric and manual shift outboard gearboxes, hydraulic tilt mechanisms, and stern drive
gearboxes.

BENEFITS

  • High viscosity index
  • Excellent low-temperature properties
  • Shear stable formulation
  • Will not harm brass or bronze
  • Excellent wear protection

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF TE-ML 08
  • ZF TE-ML 24A

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.853
Viscosity 40°C cSt 78.5
Viscosity 100°C cSt 12.8
Viscosity Index 164
Flash Point °C >205
Colour L 1.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK AIR TOOL LUBRICANT

PEAK AIR TOOL OIL

PKSAT005_HR
PKSAT005_REAR_HR
PKSAT020
PKSAT005_HR PKSAT005_REAR_HR PKSAT020
PRODUCT CODE PACK SIZE CTN QTY
PKSAT005 5 Litre 4
PKSAT020 20 Litre

PRODUCT DESCRIPTION

PEAK AIR TOOL LUBRICANT is a mineral-based lubricant with anti-wear, oxidation and corrosion
inhibitors, and anti-foam additives. It is a thermally stable fluid capable of handling high loads
and temperatures and is designed for lubricating the internal parts of pneumatic air tools.
It also has excellent water separation and hydrolytic stability for prolonged lubricant life
and improved equipment performance.

PEAK AIR TOOL LUBRICANT is suitable for most air tools and will extend the life of your air ratchet,
air drill, impact wrench, air chisel, and other air tools

BENEFITS

  • Provides excellent wear and corrosion protection
  • Extends tool life
  • Enhanced air release and anti-foam properties prevent cavitation
  • Excellent filterability prevents filter blockages

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.854
Viscosity 40°C cSt 31.0
Viscosity 100°C cSt 5.7
Viscosity Index 118
Flash Point °C >205
Colour L 1.5

Find the Smarter product for your application,
talk with our expert technical staff today.

TECH TALK HEADPHONES

TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL