PEAK BENDING OIL SSH

PEAK BENDING OIL SSH

91150020
91150020
PRODUCT CODE PACK SIZE CTN QTY
91150020 20 Litre
91150205 205 Litre

DESCRIPTION & APPLICATION

PEAK BENDING OIL SSH is an active type water-washable neat metal working oil formulated
to meet the most severe bending and drawing applications, including with stainless steel.

PEAK BENDING OIL SSH is a viscous lubricant that is high in extreme pressure additive
which makes it particularly suited for use on heavy-duty operations such as bending and
drawing of stainless steels. The oil contains a small percentage of an emulsifier to assist with
water-wash cleaning requirements. The emulsion is “Quick Break” meaning that the separated
oil can be skimmed off for disposal – the water can then be reprocessed or recycled.

BENEFITS

  • Improved dye life
  • Reduction in galling with less potential for scratching or scoring
  • Quick break emulsion

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.996
Viscosity 40°C cSt 330
Viscosity Index 86
Flash Point °C >200

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKIHM046005_HR

PEAK LOMA 46

PKIAM068005_HR

PEAK AC 68 COMPRESSOR OIL

PKISM032020

PEAK BRAE 32

PKIMM046020

PEAK JAY 46

PEAK MOULD OIL

PEAK MOULD OIL

PKIMO020
PKIMO205
PKIMO020 PKIMO205
PRODUCT CODE PACK SIZE CTN QTY
PKIMO020 20 Litre
PKIMO205 205 Litre
PKIMO1000 1000 Litre

DESCRIPTION & APPLICATION

CONCRETE FORM & MOULD OIL

PEAK MOULD OIL is a release agent for the manufacture of concrete slabs and pre-stressed concrete. It is specially formulated to ensure clean release from steel, aluminum, plywood, or composite forms, ensuring a high-quality concrete surface finish.

BENEFITS

  • Can be applied with a roller or brush.
  • Excellent surface conditioning characteristics
  • Formulated to deliver clean concrete release
  • Apply easily even at temperature extremes

HOW TO APPLY:

PEAK MOULD OIL can be applied by spray, brush or by using a roller

  • For some surfaces, application by using a roller is the preferred method. The oil is used for coating the walls and floors of rectangular moulds before pouring aerated concrete.
  • Forms and moulds should be clean and reasonably dry for each pour and should be coated before the reinforcing steel is put in place.
  • In large-scale production it is recommended that a spray method be used to apply the oil.
  • It is desirable that a light coating be applied as a heavy coating allows the excess to run off and collect in the corners of the mould or any other niches, this run off will permeate the concrete.
  • When using a spray system to apply the oil, the spray lines must be regularly blown out and it is recommended that moisture traps be
    placed in the lines.

Note: If the reinforcing steel is accidentally coated with Mould oil, the steel may not bond to the concrete. Mould Oil on the reinforcing  steel should be removed with kerosene or other similar solvents.

TYPICAL CHARACTERISTICS

TEST METHOD TYPICAL VALUE
Density 15° C g/cm³ ASTM D7042 0.845
Kinetic Viscosity @ 40°C cSt ASTM D7042 4.7
Flash Point °C ASTM D93 >70
Colour ASTM 1500 L 1.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256