PEAK TRANSGEAR XP 80

PEAK TRANSGEAR XP80

PKGM7580020
PKGM7580020
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580001 1 Litre 6
PKGM7580020 20 Litre
PKGM7580060 60 Litre
PKGM7580205 205 Litre

DESCRIPTION & APPLICATION

PEAK TRANSGEAR XP 80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK TRANSGEAR XP 80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK TRANSGEAR XP 80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK TRANSGEAR XP 80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK TRANGEAR XP 80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK 75W80

PEAK 75W80

PKGM7580005_HR
PKGM7580005_HR
PRODUCT CODE PACK SIZE CTN QTY
PKGM7580005 5 Litre 4

DESCRIPTION & APPLICATION

PEAK 75W80 gear oil is an API GL-4 multi-grade gear lubricant containing extreme pressure additives. It is recommended for hypoid or spiral bevel gears in manual transmissions and front wheel drive transaxle gearboxes of passenger cars and light/medium commercial vehicles.

PEAK 75W80 gear oil is commonly used in modern four and five speed manual transmissions where low viscosity gear oil is required to eliminate cold shift problems.

PEAK 75W80 gear oil protects all types of gears including helical, spiral bevel and hypoid to minimise scuffing, welding or galling tooth wear in severe load applications. High load carrying capacity is achieved using sulfur phosphorus extreme pressure additives.

PEAK 75W80 gear oil has excellent resistance to corrosion and foaming, and may be used in a wide variety of manual transmissions where API GL-4 SAE 75W80, 75W85, 75W90 and 80W oils are specified. The multi-grade properties eliminate the need for seasonal oil changes and provide protection over a wide temperature range.

BENEFITS

  • Protects all types of gears including helical, spiral bevel and hypoid
  • Minimise’s scuffing, welding or galling tooth wear in severe load applications
  • High load carrying capacity
  • Excellent resistance to corrosion and foaming
  • Provide’s protection over a wide temperature range

NOTE: DO NOT USE PEAK 75W80 gear oil where API GL-5 oils are specified.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF: TE-ML02, TE-ML08
  • MAN: 341 (EOD)
  • MIL-L-2105D
  • Daimler-Chrysler: 235.5, 235.1

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.87
Viscosity 40°C cSt 61
Viscosity 100°C cSt 8.5
Viscosity Index 112

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK MULTI DUTY 50

PEAK MULTI DUTY 50

Generic 20L
Generic 20L
Product Code Pack size CTN QTY
PKDMM50020 20 Litre
PKDMM50205 205 Litre

DESCRIPTION & APPLICATION

PEAK MULTI DUTY 50 has been formulated to lubricate turbo-charged and normally aspirated four-stroke
diesel’s operating under severe stress conditions in both on and off-highway situations. The low phosphorous
level and low sulphated ash content ensure its use for mixed fleet operators including those with petrol
engines with catalytic converters.

PEAK MULTI DUTY 50 is suitable for use in four-stroke engines in road transport, mining, marine, agricultural,
earthmoving, stationary plant, and construction equipment.

PEAK MULTI DUTY 50 is suitable for the lubrication of all types of trucks, earthmoving equipment, stationary
engines, cars, and light commercials where a CF diesel rating or an SG petrol rating is required. It also offers
excellent protection against corrosion and wear throughout the drain period.

PEAK MULTI DUTY 50 is suitable for US diesel truck engines up to 1990, Japanese and European diesel trucks,
leaded or unleaded petrol engines and LPG fuelled engines. Its low phosphorous content protects the life of
catalytic converters and its low ash content prevents injector fouling.

PEAK MULTI DUTY 50 meets or exceeds the requirements of a CF/SG engine oil. It provides a high level of
protection against wear, sludge formation, and acid corrosion.

PEAK MULTI DUTY 50 assists in maintaining engine cleanliness and extending the life of all moving parts
subject to wear.

BENEFITS

  • Formulated to lubricate turbo-charged and normally aspirated four stroke diesel’s
  • Offers excellent protection against corrosion and wear
  • High level of protection against wear, sludge formation and acid corrosion

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API CF-4/CF-2/CF/SG
  • Mack E-K/2
  • Allison C4
  • DETROIT DIESEL 7SE 270
  • Caterpillar T-2
  • Japanese CD
  • MB 227.0, 228.0
  • MIL-L-2104E/2104D/2104F

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density @ 15°C, kg/L 0.905 kg/L
Viscosity cSt @ 40°C 205 cSt
Viscosity cSt @ 100°C 19.0 cSt
Viscosity Index 104
Flash Point °(COC) >220
Pour Point °C -15 °C
Sulphated Ash % <1.00

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPDPFC.325_HR

PEAK DPF CLEANER

PKADPDIC.325_HR

PEAK DIESEL INJECTOR CLEANER

PKADDEF010

PEAK AdBlue® DIESEL EXHAUST FLUID

PKSTW005_HR

PEAK TRUCK WASH

PEAK CLEAN-A SCREEN

PEAK CLEAN-A SCREEN

PKSWC005_HR
PKSWC005_HR
Product Code Pack size CTN QTY
PKSWC005 5 Litre 4
PKSWC020 20 Litre

DESCRIPTION & APPLICATION

PEAK CLEAN-A SCREEN is a windscreen washer additive that is added to the vehicles windscreen washer
reservoir to remove oil, silicone, bugs and grime.

Suitable for use on all vehicles fitted with a windscreen washer reservoir including cars and trucks.

DIRECTIONS

  • Add 1% or 200ml to the windscreen washer reservoir
  • The product will be dispersed in the reservoir water and leaves a clear, streak-free finish

BENEFITS

  • Increases wiper blade efficiency
  • Leaves a clear, streak free finish

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL

PEAK READY TO USE COOLANT

PEAK READY TO USE COOLANT

PKRC4SP005_HR
PKRC4SP005_REAR_HR
PKRC4SP020_HR
PKRC4SP005_HR PKRC4SP005_REAR_HR PKRC4SP020_HR
Product Code Pack size CTN QTY
PKRC4SP005 5 Litre 4
PKRC4SP020 20 Litre
PKRC4SP205 205 Litre

DESCRIPTION & APPLICATION

PEAK READY TO USE COOLANT is a coolant suitable for passenger cars, 4WD and light-duty diesel trucks. It
contains approximately 335 grams per litre of ethylene glycol and will provide year-round protection from
corrosion, overheating and freezing. It makes an excellent radiator top up fluid or full fill radiator coolant.

PEAK READY TO USE COOLANT gives your engine and cooling system extended multi-functional protection.
It contains advanced corrosion inhibitors that will protect your engine and cooling system components,
provides high heat transfer for more efficient cooling, anti-boil properties reducing coolant loss through
overheating, plus antifreeze protection. The international Engine Manufactures specify that a coolant
must contain 33% to 50% of ethylene glycol.

PEAK READY TO USE COOLANT meets this requirement by providing high heat transfer and corrosion
protection for your cooling system. It meets the major international engine manufacturer engine coolant
performance specifications and is compatible with the non-metallic materials found in cooling systems
including rubber hoses, gaskets, silicone elastomer seals and plastics.

The ethylene glycol in PEAK READY TO USE COOLANT provides higher boiling and lower freezing protection
as follows: Boiling Point: 124°C Freezing Point: -19°C

PEAK READY TO USE COOLANT is warranted to protect your engine and cooling system for 3 years
or 100,000km in passenger cars, 4WD and light-duty diesel trucks.

BENEFITS

  • For aluminium, brass, cast iron or copper cooling systems
  • Suitable for 4, 6 and 8 cylinder cars and light commercials
  • Blended using demineralised water to a 33% mix
  • Contains approximately 356 gms/litre ethylene glycol

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ASTM D-2809
  • ASTM D-4340
  • ASTM D-2570
  • ASTM D-3306
  • ASTM D-4985
  • ASTM D-1384
  • AS/NZS 2108.1:1997 Type A
  • GM 1825M
  • GM 1899M
  • Ford ESE M97B44-A
  • Ford ESE M97B18-C
  • SAE J1941
  • BSI6580
  • SAE J1034

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
pH 10.0 – 11.0
Reserve Alkalinity (mL 0.1N HCI) 10.0 min.
Specific Gravity (15°C) 1.05 – 1.145
Freeze Point -19°C
Foaming Properties – Volume (mL) 50 max.
Foaming Properties – Break Time 5 max.
Odour Characteristic
Colour Green
Shelf Life 2 years
Total Glycol (weight %) 30.0 min.
Total Apparent Water (weight %) 70.0 max.

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL

PEAK RCI CONCENTRATE LONGLIFE

PEAK RCI CONCENTRATE LONGLIFE

PKRCI005
PKRCI005
Product Code Pack size CTN QTY
PKRCI005 5 Litre 4
PKRCI020 20 Litre
PKRCI205 205 Litre

DESCRIPTION & APPLICATION

PEAK RCI LONGLIFE RADIATOR CORROSION INHIBITOR is a new generation, all-organic corrosion inhibitor
designed to provide superior cooling system protection for all petrol, diesel, and gas engines where an
anti-freeze anti-boil product is not required. All mobile and stationary petrol and diesel engines, including
passenger vehicles, gas-fuelled vehicles, tractors, buses, trucks, industrial and mining applications. Can be
dosed between 3.5% – 10%. The normal dose rate is 5%.

PEAK RCI LONGLIFE RADIATOR CORROSION INHIBITOR maximises the period between coolant changes,
Passenger Vehicles and Light Commercial Transporters – 4 years. Heavy-Duty Vehicles – 500,000km/6,000
hrs (When good quality water is used.)

BENEFITS

  • Optimum protection for all metals commonly found in cooling systems including aluminium radiators
  • Provides a complete inhibitor package suitable for mixed metal protection. Does not affect non-metallic
    components such as seals, gaskets or hoses
  • Excellent cavitation and liner pitting protection
  •  Optimises reliability and operating life of water pump (silicate free product). Provides excellent protection
    against scaling, rust and residue buildup
  • Optimum heat transfer of system is maintained throughout product service life. Environmentally friendly
    and biodegradable
  • Designed and manufactured in Australia for Australian conditions

SPECIFICATIONS AND PERFORMANCE LEVEL

  • ASTM’s D1384, D4340, D2809, D2570, D1881, D1287, D1121, D3634
  • AS/NZS 2108.1:1997 type B

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Colour Green
Odour Mild
PH @ 25°C 8.75 ± 0.5
Specific Gravity (15°C) 1.058 typical

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPPET.240_HR

PEAK PETROL EGR TREATMENT

PKADDEF010

PEAK AdBlue®

PKPSFS001_HR

PEAK SYNTHETIC POWER STEERING FLUID

PKCO005_HR

PEAK CHAIN BAR OIL

PEAK 75W85

PEAK 75W85

PKGS758502.5_HR
PKGS758502.5_REAR_HR
PKGS7585020
PKGS758502.5_HR PKGS758502.5_REAR_HR PKGS7585020
PRODUCT CODE PACK SIZE CTN QTY
PKGS758502.5 2.5 Litre 4
PKGS7585020 20 Litre
PKGS7585060 60 Litre
PKGS7585205 205 Litre

DESCRIPTION & APPLICATION

PEAK 75W85 uses a blend of synthetic and high-quality mineral base fluids. The 75W85
viscosity assists with cold gear changes and provides gear protection at high operating
temperatures.

PEAK 75W85 is suitable for manual gearboxes, transfer cases, and transaxles in passenger cars,
4WDs and trucks that specify the use of a 75W85 oil meeting API GL-4, it is also suitable for
electric and manual shift outboard gearboxes, hydraulic tilt mechanisms, and stern drive
gearboxes.

BENEFITS

  • High viscosity index
  • Excellent low-temperature properties
  • Shear stable formulation
  • Will not harm brass or bronze
  • Excellent wear protection

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API GL-4
  • ZF TE-ML 08
  • ZF TE-ML 24A

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.853
Viscosity 40°C cSt 78.5
Viscosity 100°C cSt 12.8
Viscosity Index 164
Flash Point °C >205
Colour L 1.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADOS001_HR

PEAK OIL STABILISER

PKGXSRL.450

PEAK SUPER RED GREASE

PKRC4SC005

PEAK 4 SEASONS COOLANT CONCENTRATE

PKSTW005_HR

PEAK TRUCK WASH

PEAK MULTI DUTY DD 40

Peak Multi Duty 40

PKDMM40020
PKDMM40020
Product Code Pack size CTN QTY
PKDMM40020 20 Litre
PKDMM40205 205 Litre
PKDMM401000 1000 Litre

PRODUCT DESCRIPTION

PEAK MULTI DUTY DD 40 is a high-quality engine oil specifically designed for non-intercooled and intercooled turbo-charged engines operating under severe on and off-highway conditions.

PEAK MULTI DUTY DD 40 is formulated to control oil consumption, minimises deposits, and ensure protection from rust and oxidation. Proven to reduce wear on components leading to longer engine life.

PEAK MULTI DUTY DD 40 is suitable for Detroit Diesel two-stroke engines and four-stroke diesel engines where a monograde oil is preferred for on-highway and heavy-duty trucks, mining, agricultural, earthmoving, stationary, and construction equipment. It may also be used in petrol engines where SAE 40 API SJ oils are specified

BENEFITS

  • Minimises deposits
  • Outstanding rust and oxidisation prevention
  • Prolonged engine life

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API CF-4 / CG-4
  • API SJ
  • MIL-L-2104D / E / F
  • Detroit Diesel: 7SE-270

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.886
Viscosity 40°C cSt 128.0
Viscosity 100°C cSt 14.0
Viscosity Index 107
Flash Point °C >230
Sulphated Ash <1.00
Colour L 2.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPDPFC.325_HR

PEAK DPF CLEANER

PKADPDIC.325_HR

PEAK DIESEL INJECTOR CLEANER

PKADDEF010

PEAK AdBlue® DIESEL EXHAUST FLUID

PKSTW005_HR

PEAK TRUCK WASH

PEAK MULTI DUTY 30

Peak Multi Duty 30

PKDMM30020
PKDMM30020
Product Code Pack size CTN QTY
PKDMM30020 20 Litre
PKDMM30205 205 Litre

PRODUCT DESCRIPTION

PEAK MULTI DUTY 30 is a high-quality engine oil specifically designed for non-intercooled and intercooled turbo-charged engines operating under severe on and off-highway conditions.

PEAK MULTI DUTY 30 is suitable for naturally aspirated and turbocharged four-stroke diesel engines where a monograde oil is preferred for on-highway and heavy-duty trucks. It may also be used in petrol engines where SAE 30 API SJ oils are specified. Meets the requirements of many older engines such as Leyland, International Harvester, Gardner, Fiat, and Bedford.

BENEFITS

  • Minimises deposits
  • Outstanding rust and oxidisation prevention
  • Prolonged engine life

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API CC / CD / CF-4 / CG-4
  • API SJ
  • Detroit 7SE-270
  • MIL-L-2104D / E / F

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.878
Viscosity 40°C cSt 90
Viscosity 100°C cSt 10.5
Viscosity Index 100
Flash Point °C >220
Sulphated Ash <1.00
Colour L 2.0

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256

RELATED PRODUCTS

PKADPDPFC.325_HR

PEAK DPF CLEANER

PKADPDIC.325_HR

PEAK DIESEL INJECTOR CLEANER

PKADDEF010

PEAK AdBlue® DIESEL EXHAUST FLUID

PKSTW005_HR

PEAK TRUCK WASH

PEAK GLOBAL DIESEL 15W40

PEAK GLOBAL DIESEL 15W40

PKDM1540G001_HR
PKDM1540G005_HR
PKDM1540G005_REAR_HR
PKDM1540G007_HR
PKDM1540G007_REAR_HR
PKDM1540G010_HR
PKDM1540G020
PKDM1540G001_HR PKDM1540G005_HR PKDM1540G005_REAR_HR PKDM1540G007_HR PKDM1540G007_REAR_HR PKDM1540G010_HR PKDM1540G020
Product Code Pack size CTN QTY
PKDM1540G001 1 Litre 6
PKDM1540G005 5 Litre 4
PKDM1540G010 10 Litre
PKDM1540G020 20 Litre
PKDM1540G205 205 Litre

PEAK GLOBAL DIESEL 15W40 is a multi-grade diesel engine oil formulated to provide
outstanding protection for diesel engines used in the toughest on and off-road applications.

PEAK GLOBAL DIESEL 15W40 is recommended for vehicles where performance specifications API CI-4/SL, Volvo VDS-3, and Global DHD-1. Is suitable for use in diesel, passenger cars, 4WDs, light & heavy-duty commercial engines in trucks, tractors, agricultural & earthmoving, forklifts, and stationary engines. It is also suitable for Petrol, E10, and LPG.

BENEFITS

  • Excellent detergent and dispersant additives for a cleaner engine.
  • Unique viscosity control additives prevent thickening of the oil.
  • Very high shear stability resulting in superior load carrying ability.
  • Suitable for a multitude of vehicles both Diesel and Petrol.

SPECIFICATIONS AND PERFORMANCE LEVEL

  • API CI-4 / SL
  • ACEA E7 -16
  • MB 228.3
  • Volvo VDS-3
  • Renault Truck RLD-2
  • Global DHD-1
  • Mack EO-N / M Plus
  • Cummins CES 20076 / 20077 / 20078
  • MTU Type 2
  • Deutz DQC III-10
  • Detroit Diesel DDC 93K215
  • CAT ECF-1A / 2
  • MAN M3275

TYPICAL CHARACTERISTICS

TEST TYPICAL VALUE
Density 15° C g/cm³ 0.874
Viscosity 40°C cSt 121.1
Viscosity 100°C cSt 15.7
Viscosity Index 135.8
Flash Point °C >220
Colour L 2.5

Find the Smarter product for your application, talk with our expert technical staff today.

TECH TALK HEADPHONES
TECHNICAL LUBELINE
1300 722 256